This is an archived message posted to the Kayak Building Bulletin Board. If you would like to ask a question about building kayaks, you can post a new message.
> Boy, that's drop dead gorgous. So is that elaborate stripping job a
> veneer, or did you cut all the pieces to those shapes and fit them in? Thanks Nolan,
I would have responded sooner but am losing track of all the comments. It all strips no veneer. All the strips were milled from 5/4" deck boards. They vaty in width from 3/8'' to 3/4' wide. All 1/4" thick cove and bead.
This is an archived message from The Kayak Building Bulletin Board.
Guillemot Kayak - High
Performance Wooden Sea Kayak Designs
