This is an archived message posted to the Kayak Building Bulletin Board. If you would like to ask a question about building kayaks, you can post a new message.
I've just about finished stripping a Great Auk and will be glassing soon. I left the cove and bead on the strips at the shear. Will this cause a problem when I glass the two halves? I'm thinking if I glass all the way to that strip the cove and the bead will get covered with resin. I thought I could glass about one inch away from the shear then later cover it when taping. I'm planning on covering the outside with 4oz. and the in with 6 oz. Should I use 4oz or 6oz tape?
This is an archived message from The Kayak Building Bulletin Board.
Guillemot Kayak - High
Performance Wooden Sea Kayak Designs
