This is an archived message posted to the Kayak Building Bulletin Board. If you would like to ask a question about building kayaks, you can post a new message.
> Thanks. If I did my building in my house, the kayak would have to double
> as a table and maybe even the bed.
> As far as heating the garage, the epoxy book sort of hints at the only
> real problem is the time it would take to set. In my case, that wouldn't
> be a problem - a few days would be no big deal. Am I way off here? What
> happens to epoy below the freezing point of water (not that I would
> actually be WORKING when it was that cold, but it could drop below at
> night while the epoxy was trying to set. I realize that the epoxy needs to
> be warm when working with it, that would be no problem - I would just keep
> it and mix it in the house.
> Next question is moisture. I am lucky enought to live right on a river
> (there have been times I didn't feel it was so lucky, but usually I do).
> It is DAMP here - will that pose any problems? I wonder about the steel
> wire that pygmy supplies.
> Or am I just paranoid?
Ahwww shucks, and the "Rehzzzzzzzz" told you not to read anything I said. Tsk! Tsk! Tsk! Wwweeellllll, he's probably right, but, I'll never tell. He knows I never have anything to say about boats, and I do put folks to sleep when I write, but.............well, I'll keep this short, just for "The Man". As was mentioned, the steel wire will probably be O.K., but, if it's a concern, you could try checking out the local lumber/hardware store and see what they want for 16 or 18 or smaller copper wire. I got 50' of 16 gage copper for my little canoe and it was under $5.00. Not too much to pay for a little relief. Heck, you can have all the comic relief for free from the "Rehzzzzzzzz." You'll find that you'll get more help than you know what to do with from these folks, and even the "Rehzzzzzz" comes up with a good one once in a while.
Wake up, you got work to do!!!!!
Colorado ( Rehd ) Gotchya {;o)
This is an archived message from The Kayak Building Bulletin Board.