This is an archived message posted to the Kayak Building Bulletin Board. If you would like to ask a question about building kayaks, you can post a new message.
3M's Finesse It (an automotive buffing liquid) worked great for me. Sand out to 1000 or even 1500 (get at automotive finishing store) and then squirt on the Finesse it and buff with a wool-like buffing pad in your ROS. It really works much, much better if the varnish has had awhile (maybe at least a week) to harden first - the harder it is the more it polishes instead of justing gumming up.
Looks great!
I use this stuff to buff out varnish, and it even works on poly as long as you let the poly harden first.
This is an archived message from The Kayak Building Bulletin Board.
Guillemot Kayak - High
Performance Wooden Sea Kayak Designs
