This is an archived message posted to the Kayak Building Bulletin Board. If you would like to ask a question about building kayaks, you can post a new message.
> hi all,
> I'm about to run out of the sys3 epoxy. I was thinking of getting a west
> sys epoxy, to finish the job. but ! I'm not sure how will it work with the
> sys3 ? will it adhese to the sys3 ?
Yes it will adhere just fine. The only thing you don't want to do is mix the components. Don't use one resin with the others hardener, because they may be formulated differently.
They will adhere to each other after curing or even when green. You could use one for the glassing and the other for the finish coats with no trouble. You could even switch halfway through with no effect. Just remember that they will cure at slightly different rates.
Ian
This is an archived message from The Kayak Building Bulletin Board.
Guillemot Kayak - High
Performance Wooden Sea Kayak Designs
