This is an archived message posted to the Kayak Building Bulletin Board. If you would like to ask a question about building kayaks, you can post a new message.
Vacuum and wipe with a clean cloth dampened with denatured alcohol (quick evap) or mineral spirits (slow evap). You can get by with simply wipe-off with a clean dry cloth. DO NOT USE A TACK CLOTH! The residue is not epoxy-friendly.
Ross
> I'm just about to glass the outside of the hull. I have rounded all the
> seams so the glass will lay smoothly over the hull. The sanding of the
> seams has created a lot of dust. What is the best way to clean off the
> hull before I apply any epoxy and cloth?
This is an archived message from The Kayak Building Bulletin Board.
Guillemot Kayak - High
Performance Wooden Sea Kayak Designs
