Kayak Building Bulletin Board Old Message Archive

This is an archived message posted to the Kayak Building Bulletin Board. If you would like to ask a question about building kayaks, you can post a new message.

Re: Hatch Cutting

Posted by: Larry C. on January 6, 2000

> first of all, thanks to all for the info on hatch cutting. i will be there
> very soon on my 'tern----- BUT, i need some advece. what is the best way
> to get the saw blade THRU the deck to begin sawing with out leaving any
> entry scars thanks in advance, deeds

> .

I used a utility knife without drilling holes. The blade I used was hollow ground and had almost no set in the teeth. It also cut on the DOWN stroke.

Larry C.

Return to the Page Index or up to Kayak Building BBS Archive Index

This is an archived message from The Kayak Building Bulletin Board.

This archive and the bulletin board are sponsored by:

Guillemot Kayak - High Performance Wooden Sea Kayak Designs

Guillemot | SEE Kayak Directory | Kayak Forum | Guestbook

Maintained by Nick Schade: Info@guillemot-kayaks.com This site has been spidered by Google you can use their search engine to find information in the archive