This is an archived message posted to the Kayak Building Bulletin Board. If you would like to ask a question about building kayaks, you can post a new message.
I'm about to glass the inside of the deck. I was thinking that if I left an inch or two of fibreglass cloth beyond the sheer strip and carefully resined only up to the sheer strip, I could then use this excess cloth to bind the hull and deck together instead of using a separate piece of fibreglass tape.
Anyone else try this before? was it successful and/or worth it?
Thanks again in advance!
This is an archived message from The Kayak Building Bulletin Board.
Guillemot Kayak - High Performance Wooden Sea Kayak Designs