You are hereEvents / Events

Events


Select event terms to filter by
Friday May 14, 2010
Start: May 14 2010 12:00 pm

Once again I will be attending OkoumeFest hosted by Chesapeake Light Craft in Annapolis, MD. This is a great event to try different boats and talk to other builders. I plan to bring down my Petrel, Ganymede, Nymph and Expedition Single.

 

Saturday May 15, 2010
Start: May 14 2010 12:00 pm
End: May 15 2010 3:00 pm

Once again I will be attending OkoumeFest hosted by Chesapeake Light Craft in Annapolis, MD. This is a great event to try different boats and talk to other builders. I plan to bring down my Petrel, Ganymede, Nymph and Expedition Single.

 

Saturday June 05, 2010
Start: Jun 5 2010 9:00 am
End: Jun 5 2010 3:00 pm

Kayaks on the BeachFor over ten years now kayak builders have gathered at Bluff Point State Park in Groton, CT to share what we did last winter. This is an informal gathering of people interested in homemade kayaks and other small boats. If you have a boat or just like homemade boats, this is fun chance to visit with others with similar interests. Meet at the Beach Home Page

Friday June 11, 2010
Start: Jun 11 2010 12:00 pm

A hand made wooden kayak is not truly finished until you have put your first scratch in it. The New England Rough Water Symposium is a chance to see to it that your boat is well and fully complete along with few scratches to prove it. While "rough water" may sound scary, this is a good event for a wide range of paddlers from the novice through experienced paddlers. It will give you a chance to learn from top paddler how to use your boat to full effect.

Saturday June 12, 2010

A hand made wooden kayak is not truly finished until you have put your first scratch in it. The New England Rough Water Symposium is a chance to see to it that your boat is well and fully complete along with few scratches to prove it. While "rough water" may sound scary, this is a good event for a wide range of paddlers from the novice through experienced paddlers. It will give you a chance to learn from top paddler how to use your boat to full effect.

Sunday June 13, 2010
Start: Jun 11 2010 12:00 pm
End: Jun 13 2010 4:00 pm

A hand made wooden kayak is not truly finished until you have put your first scratch in it. The New England Rough Water Symposium is a chance to see to it that your boat is well and fully complete along with few scratches to prove it. While "rough water" may sound scary, this is a good event for a wide range of paddlers from the novice through experienced paddlers. It will give you a chance to learn from top paddler how to use your boat to full effect.

Friday June 25, 2010
Start: Jun 25 2010 6:24 pm

WoodenBoat Show LogoThe Annual WoodenBoat Show is a tremendous celebration of boats new and old, large and small. Throughout the Seaport, the energy was palpable from discovering a needed tool, learning a new skill, to pure, jaw-dropping admiration for the incredible craftsmanship found at every turn. Summer begins at the WoodenBoat Show!

Saturday June 26, 2010

WoodenBoat Show LogoThe Annual WoodenBoat Show is a tremendous celebration of boats new and old, large and small. Throughout the Seaport, the energy was palpable from discovering a needed tool, learning a new skill, to pure, jaw-dropping admiration for the incredible craftsmanship found at every turn. Summer begins at the WoodenBoat Show!

Sunday June 27, 2010
Start: Jun 25 2010 6:24 pm
End: Jun 27 2010 6:24 pm

WoodenBoat Show LogoThe Annual WoodenBoat Show is a tremendous celebration of boats new and old, large and small. Throughout the Seaport, the energy was palpable from discovering a needed tool, learning a new skill, to pure, jaw-dropping admiration for the incredible craftsmanship found at every turn. Summer begins at the WoodenBoat Show!

Sunday July 11, 2010
Start: Jul 11 2010 6:06 pm

Ganymede Kayak"Ganymede" is a brand new design by Nick Schade: An easy-to-handle recreational kayak, fun to paddle and fast and easy to build.

Monday July 12, 2010

Ganymede Kayak"Ganymede" is a brand new design by Nick Schade: An easy-to-handle recreational kayak, fun to paddle and fast and easy to build.

Tuesday July 13, 2010

Ganymede Kayak"Ganymede" is a brand new design by Nick Schade: An easy-to-handle recreational kayak, fun to paddle and fast and easy to build.

Wednesday July 14, 2010

Ganymede Kayak"Ganymede" is a brand new design by Nick Schade: An easy-to-handle recreational kayak, fun to paddle and fast and easy to build.

Thursday July 15, 2010

Ganymede Kayak"Ganymede" is a brand new design by Nick Schade: An easy-to-handle recreational kayak, fun to paddle and fast and easy to build.

Friday July 16, 2010

Ganymede Kayak"Ganymede" is a brand new design by Nick Schade: An easy-to-handle recreational kayak, fun to paddle and fast and easy to build.

Saturday July 17, 2010
Start: Jul 11 2010 6:06 pm
End: Jul 17 2010 6:06 pm

Ganymede Kayak"Ganymede" is a brand new design by Nick Schade: An easy-to-handle recreational kayak, fun to paddle and fast and easy to build.

Sunday July 25, 2010
Start: Jul 25 2010 6:00 pm

Once again I will be leading students through the building of the Stitch and Glue Night Heron from a pile of plywood pieces through a fully assembled sea kayak at the WoodenBoat School in Brooklin, Maine.

This fast-pace class is suitable for anyone from novice woodworkers who want an introduction to boatbuilding, through experienced boat builders who want to learn about stitch and glue kayak building and fiberglass work.

Monday July 26, 2010

Once again I will be leading students through the building of the Stitch and Glue Night Heron from a pile of plywood pieces through a fully assembled sea kayak at the WoodenBoat School in Brooklin, Maine.

This fast-pace class is suitable for anyone from novice woodworkers who want an introduction to boatbuilding, through experienced boat builders who want to learn about stitch and glue kayak building and fiberglass work.

Tuesday July 27, 2010

Once again I will be leading students through the building of the Stitch and Glue Night Heron from a pile of plywood pieces through a fully assembled sea kayak at the WoodenBoat School in Brooklin, Maine.

This fast-pace class is suitable for anyone from novice woodworkers who want an introduction to boatbuilding, through experienced boat builders who want to learn about stitch and glue kayak building and fiberglass work.

Wednesday July 28, 2010

Once again I will be leading students through the building of the Stitch and Glue Night Heron from a pile of plywood pieces through a fully assembled sea kayak at the WoodenBoat School in Brooklin, Maine.

This fast-pace class is suitable for anyone from novice woodworkers who want an introduction to boatbuilding, through experienced boat builders who want to learn about stitch and glue kayak building and fiberglass work.

Thursday July 29, 2010

Once again I will be leading students through the building of the Stitch and Glue Night Heron from a pile of plywood pieces through a fully assembled sea kayak at the WoodenBoat School in Brooklin, Maine.

This fast-pace class is suitable for anyone from novice woodworkers who want an introduction to boatbuilding, through experienced boat builders who want to learn about stitch and glue kayak building and fiberglass work.

Friday July 30, 2010

Once again I will be leading students through the building of the Stitch and Glue Night Heron from a pile of plywood pieces through a fully assembled sea kayak at the WoodenBoat School in Brooklin, Maine.

This fast-pace class is suitable for anyone from novice woodworkers who want an introduction to boatbuilding, through experienced boat builders who want to learn about stitch and glue kayak building and fiberglass work.

Saturday July 31, 2010
Start: Jul 25 2010 6:00 pm
End: Jul 31 2010 12:00 pm

Once again I will be leading students through the building of the Stitch and Glue Night Heron from a pile of plywood pieces through a fully assembled sea kayak at the WoodenBoat School in Brooklin, Maine.

This fast-pace class is suitable for anyone from novice woodworkers who want an introduction to boatbuilding, through experienced boat builders who want to learn about stitch and glue kayak building and fiberglass work.

Friday August 13, 2010
Start: Aug 13 2010 6:42 pm

Maine Boats Homes and HarborIf you love the coast of Maine, you won't want to miss this show, where Tradition Meets Innovation™. Come see Maine's finest artists, architects, boatbuilders, furniture makers, craftsmen, designers, marine gear vendors, and musicians.

Saturday August 14, 2010

Maine Boats Homes and HarborIf you love the coast of Maine, you won't want to miss this show, where Tradition Meets Innovation™. Come see Maine's finest artists, architects, boatbuilders, furniture makers, craftsmen, designers, marine gear vendors, and musicians.

Sunday August 15, 2010
Start: Aug 13 2010 6:42 pm
End: Aug 15 2010 6:42 pm

Maine Boats Homes and HarborIf you love the coast of Maine, you won't want to miss this show, where Tradition Meets Innovation™. Come see Maine's finest artists, architects, boatbuilders, furniture makers, craftsmen, designers, marine gear vendors, and musicians.

Sunday September 05, 2010
Start: Sep 5 2010 6:00 pm

I am privileged to take over the reins for this class from Ted Moores who had taught at the WoodenBoat School for 17 years. Ted is a godfather to all those who now build small boats using the strip-planked, fiberglass and epoxy method. He started this class at the WoodenBoat School building two canoes.

Monday September 06, 2010

I am privileged to take over the reins for this class from Ted Moores who had taught at the WoodenBoat School for 17 years. Ted is a godfather to all those who now build small boats using the strip-planked, fiberglass and epoxy method. He started this class at the WoodenBoat School building two canoes.

Tuesday September 07, 2010

I am privileged to take over the reins for this class from Ted Moores who had taught at the WoodenBoat School for 17 years. Ted is a godfather to all those who now build small boats using the strip-planked, fiberglass and epoxy method. He started this class at the WoodenBoat School building two canoes.

Wednesday September 08, 2010

I am privileged to take over the reins for this class from Ted Moores who had taught at the WoodenBoat School for 17 years. Ted is a godfather to all those who now build small boats using the strip-planked, fiberglass and epoxy method. He started this class at the WoodenBoat School building two canoes.

Thursday September 09, 2010

I am privileged to take over the reins for this class from Ted Moores who had taught at the WoodenBoat School for 17 years. Ted is a godfather to all those who now build small boats using the strip-planked, fiberglass and epoxy method. He started this class at the WoodenBoat School building two canoes.

Friday September 10, 2010

I am privileged to take over the reins for this class from Ted Moores who had taught at the WoodenBoat School for 17 years. Ted is a godfather to all those who now build small boats using the strip-planked, fiberglass and epoxy method. He started this class at the WoodenBoat School building two canoes.

Saturday September 11, 2010
Start: Sep 5 2010 6:00 pm
End: Sep 11 2010 12:00 pm

I am privileged to take over the reins for this class from Ted Moores who had taught at the WoodenBoat School for 17 years. Ted is a godfather to all those who now build small boats using the strip-planked, fiberglass and epoxy method. He started this class at the WoodenBoat School building two canoes.

Saturday October 30, 2010
Start: Oct 30 2010 9:00 am
End: Oct 30 2010 4:00 pm

This one day workshop at the Connecticut Valley School of Woodworking in Manchester CT will provide interested boatbuilders a solid overview of the strip-planked method of building small boats.

Saturday January 15, 2011
Start: Jan 15 2011 9:00 am

NEW

A guide to constructing small boats with wood strips and epoxy.

 

woodstrip canoe

NOTE: If you are thinking of signing up for this class, please do so early. I will need at least 3 weeks notice to be sure to have enough material prepared for everyone. - Thanks, Nick

 

Sunday January 16, 2011

NEW

A guide to constructing small boats with wood strips and epoxy.

 

woodstrip canoe

NOTE: If you are thinking of signing up for this class, please do so early. I will need at least 3 weeks notice to be sure to have enough material prepared for everyone. - Thanks, Nick

 

Monday January 17, 2011

NEW

A guide to constructing small boats with wood strips and epoxy.

 

woodstrip canoe

NOTE: If you are thinking of signing up for this class, please do so early. I will need at least 3 weeks notice to be sure to have enough material prepared for everyone. - Thanks, Nick

 

Tuesday January 18, 2011

NEW

A guide to constructing small boats with wood strips and epoxy.

 

woodstrip canoe

NOTE: If you are thinking of signing up for this class, please do so early. I will need at least 3 weeks notice to be sure to have enough material prepared for everyone. - Thanks, Nick

 

Wednesday January 19, 2011

NEW

A guide to constructing small boats with wood strips and epoxy.

 

woodstrip canoe

NOTE: If you are thinking of signing up for this class, please do so early. I will need at least 3 weeks notice to be sure to have enough material prepared for everyone. - Thanks, Nick

 

Thursday January 20, 2011
Start: Jan 15 2011 9:00 am
End: Jan 20 2011 12:00 pm

NEW

A guide to constructing small boats with wood strips and epoxy.

 

woodstrip canoe

NOTE: If you are thinking of signing up for this class, please do so early. I will need at least 3 weeks notice to be sure to have enough material prepared for everyone. - Thanks, Nick

 

Wednesday February 23, 2011
Start: Feb 23 2011 6:00 pm
End: Feb 23 2011 9:30 pm

wooden kayak paddleIf you have a wooden kayak, you really need a wooden paddle. In this 5 evening class students will build their own laminated wood kayak paddle. The paddle can be feathered or unfeathered. We will glue up the wood, cut the blade pieces, glue them to the shaft and shape the blades.

 

Location:

Friday March 18, 2011
Start: Mar 18 2011 3:47 pm
Maine Boatbuilders Show

This show is the first hint of spring sparking dreams of the upcoming boating season. With an awesome selection of fine boats, this is not your average consumer boat show. I have yet to see any glitter gelcoat or the slightest hint of an over-powered bass boat, these are boats built by craftsmen dedicated to their craft.

Saturday March 19, 2011
Maine Boatbuilders Show

This show is the first hint of spring sparking dreams of the upcoming boating season. With an awesome selection of fine boats, this is not your average consumer boat show. I have yet to see any glitter gelcoat or the slightest hint of an over-powered bass boat, these are boats built by craftsmen dedicated to their craft.

Sunday March 20, 2011
Start: Mar 18 2011 3:47 pm
End: Mar 20 2011 3:47 pm
Maine Boatbuilders Show

This show is the first hint of spring sparking dreams of the upcoming boating season. With an awesome selection of fine boats, this is not your average consumer boat show. I have yet to see any glitter gelcoat or the slightest hint of an over-powered bass boat, these are boats built by craftsmen dedicated to their craft.

Wednesday April 20, 2011
Start: Apr 20 2011 6:30 pm
End: Apr 20 2011 9:00 pm

 

Kayak Design log

 

I'll be making a presentation at the Connyak April meeting. I've been asked to talk about kayak design. The goal is to help people who want to design their own boat as well as give guidance to people who are buying boats and want to have some tools for evaluating designs

Friday May 13, 2011
Start: May 13 2011 12:00 pm

Every year since 1998 Chesapeake Light Craft has been hosting a gathering of small boat builders. On Friday they have an open house at their shop with demonstrations and a cookout. On Saturday it is on a beach on Chesapeake Bay.

I'll be bringing some boats down and giving some sort of demonstration this year. Come visit, bring a boat if you've got one, or just test boats you may want to build.

 

Location: Chesapeake Light Craft, Annapolis, MD

 

Saturday May 14, 2011
Start: May 13 2011 12:00 pm
End: May 14 2011 4:00 pm

Every year since 1998 Chesapeake Light Craft has been hosting a gathering of small boat builders. On Friday they have an open house at their shop with demonstrations and a cookout. On Saturday it is on a beach on Chesapeake Bay.

I'll be bringing some boats down and giving some sort of demonstration this year. Come visit, bring a boat if you've got one, or just test boats you may want to build.

 

Location: Chesapeake Light Craft, Annapolis, MD

 

Syndicate

Syndicate content