You are hereNick's Blog

Nick's Blog


Feed-Through Kayak Deck Fittings

I've got mixed feelings about deck lines. All those pieces of string running around the deck mess up the beauty of the wood, but if you should end up swimming next to the boat for some reason, having something to grab onto may save your life. I am even more ambivalent about hatch hold-down systems. Again, most systems mess up the lines of the boat, yet hatches are really useful for carrying gear.

Picture Books...

I put together a couple small photo books showing an overview of the building process for my Nymph canoe and Petrel kayak. I orginally made these to bring to shows to help explain to people how I make my boats. I got a fair number of requests from people who wanted a copy of the books, so I've put the books up on Lulu.

Overview of Making the Cockpit Coaming

Preparation

The hole pretty much defines the shape so cutting the hole accurately is step one. Since that step the boat has been fiberglassed and the rough edges left over from that need to be cleaned up.

Carbon/Kevlar, Carbon Fiber and Glass on the Petrel Interior

You don't need to see more sanding, but that is what needs to happen before glassing the inside so I kept the sanding footage to a minimum in this video. Next I added a fillet in the chine. The Petrel has a hard chine aft of the cockpit, while it doesn't need a fillet adding one will strengthen the corner and make it easier to lay in the fabric.

Putting an Accent Strip on a Stained Hull

Like the feature line on the deck, I wanted to have a bright maple accent along the sheer line between the deck and hull. Since the feature on the deck was in the middle of a stained area I had to stain the accent strip and then scrape the stain off.

Hardcopy Plans Catalog

If you like to have a little reading material hanging around the house I've put together a print version of my plans catalog. You can either get it for free by going to the Scribd site to download a PDF or you can get have MagCloud print out a nice bound and glossy copy and send it to you:

Applying Fill Coats - Light and Heavy

I'm applying two different sort of fill coats in this video. One is quite light and the other is heavier. The hull will eventually get another layer of fiberglass, after I have joined the deck in place.

Fiberglassing the Petrel Deck and Hull

At the start of the day I went into the shop and turned the heat up to 80° F (27° C) and made sure the lamp I keep on my epoxy to keep it warm was turned on. This assures the epoxy flows easily.

I rolled the cloth out on the boat about an hour before I started glassing. I could have done it earlier, but I did want to give it some time to warm up to room temperature.

Staining Video

I posted a long article about staining about a week ago, and here is some video to accompany it.

Translate Page

 

 

Syndicate

Syndicate content