You are hereStrip Built

Strip Built


Thin strips of wood covered with fiberglass

Making Petrel Play: Joining Deck & Hull - Episode 15

Transcript

Hi I'm Nick Schade at Guillemot Kayaks, welcome episode number 15 of my series on make the strip planked Petrel Play kayak.

In the last episode I installed a hatch, deck line fittings and did end pours, in this episode I'll finish up the hatch and varnish the interior of both the deck and hull before joining them together.

Making Petrel Play: Hatches and Deck Hardware - Episode 14

Transcript

Hi I'm Nick Schade at Guillemot Kayaks, welcome the 14th episode in my series on building the strip built Petrel Play kayak.

In the last episode I glassed the coaming and the deck interior. In this episode I'll cut and install the hatch, install the deck fittings and cheek plates and make end-pours.

Making Petrel Play: Glassing the Hull Interior - Episode 12

Transcript

Hi, I'm Nick Schade of Guillemot Kayaks. Welcome to Episode 12 of my series on making the strip built Petrel Play kayak.

In the last episode I made the coaming of the kayak. In this episode I'll be scraping and sanding the interior of the hull before applying a layer of fiberglass, wetting it out with epoxy and then adding a light fill coat.

Making Petrel Play: Making the Coaming - Episode 11

Transcript

Hi, I'm Nick Schade at Guillemot Kayaks. Welcome to Episode 13 of my series of videos on making the Petrel Play, a strip built kayak.

In the last episode I cleaned up the hull interior and then fiberglassed it. In this episode I will do the same to the deck, with the added excitement of glassing the coaming lip.

The cleanup of the deck interior proceeds in the same manner as the hull. I start with good sharp paint scrapers. 

Making Petrel Play: Glassing the Deck Exterior - Episode 10

Transcript

Hi, I'm Nick Schade at Guillemot Kayaks. Welcome to the 10th episode of my series on building the Petrel Play

In the last episode I glassed the hull. In this episode I'll glass the deck, but before that I need to give it a final sanding, when I'm done glassing I'll apply a heavy fill coat.

Making Petrel Play: Fiberglassing the Hull - Episode 9

Transcript

Hi, I'm Nick Schade at Guillemot Kayaks. Welcome to Episode 9 of my series on building Petrel Play, a cedar-strip kayak.

Making Petrel Play: Fitting the Cockpit Recess - Episode 8

Transcript

Hi, I’m Nick Schade, the designer, builder and owner of Guillemot Kayaks. Welcome to episode 8 of my series on making the Petrel Play strip built kayak. 

Making Petrel Play: Scraping and Sanding - Episode 7

Transcript

Hello, I’m Nick Schade the owner, designer and builder at Guillemot Kayaks. We are up to episode 7 of my series on building the Petrel Play. I am making this kayak using the strip built method.

Making Petrel Play: Stripping the Deck - Episode 6

Episode 6 Transcript

Hi I'm Nick Schade at Guillemot Kayaks. Welcome to Episode 6 of my series of videos on building the Petrel Play.

Making Petrel Play: Stripping the Bottom - Episode 5

Episode 5 Transcript

Stripping the Bottom

Hi, I’m Nick Schade at Guillemot Kayaks. Welcome to episode five of my series on building the strip-built kayak the Petrel Play.  In the last episode we stripped up the side of the kayak, in this episode we will strip across the bottom.

I hope you enjoy.